Sand washing plant is a set of system that process sand and gravels from raw state into finished products with various specifications, which typically washing, cleaning, classifying, desliming, sculting, dewatering and recycling sand, transporting to stock piles, as well as recycling the most part of water used from muddy water purification. The specific configuration of sand wash plant can be changed according to specific requirements of customers. LZZG as one of large sand washing plant manufacturers is professionally creat process solutions and manufacture sand washing equipment to meet different requirements of customer’s application. Through our continuous experiment, innovation, and decades of experience, you can get a plant a plant specifically designed for your working site to meet your requirements. Whatever natural sand, crushed sand, coarse particles, fine particles, large mud content, many impurities, ores, tailings, coals, special used, we can offer a plant to meet your requirement. Usually, the wash plant is wiely used in mineral, coal, ore, tailing washing and recycling, river and lakes purifying, especially in sand washing. But it is also professional in power station. The…
More >
Sand washing screw can clean and separate the mud and impurities mixed in sand and gravels. Its novel sealing structure, adjustable overflow weir plate and reliable transmission ensure the cleaning and dewatering effect. The sand washer is widely used in roads, hydropower, construction and other industries for washing, grading, and impurity removal, as well as the washing of fine-grained and coarse-grained materials, especially suitable for sandstone used for construction and road construction. Simple structure with long service life The sand washer screw is composed of a tank body, a speed reducer, a motor, a central shaft, a spiral blade, and a bracket. The bracket is welded on central shaft, and the spiral blade is mounted and then pressed with bolts, so that the blade does not sag and deform. Sand washer screw can process 0-30mm materials and can wash out the mud, stone powder and other impurities mixed in material into clean sand. The utility model has the advantages of simple structure, easy maintenance, and high washing efficiency. How sand washing screw works Sand washer screw forms a sedimentation tank…
More >
LZ30-65 in Sri lanka Raw material: Concrete sand Feeding size: ≤ 10mm Capacity: 80-100t/h Working hours: 8-10 hours per day LZ26-55 in South Africa Raw material: River sand Feeding size: ≤ 8mm Capacity: 50t/h Working hours: 8-10 hours per day customer feedback: Glad to say we have started to test your wash plat.We are feeding it with material from an old finley screen and we are using a Aquacycle thickener plant to recycle water as much as possible. We are very happy with our early results, it seems that we are loosing almost no fine material throuth the syslones. At present we are feeding sand at about 50t/h to the plant with 65000 litres, but will install extra pump to push water up to 90000 litres per hour. LZ36-75 in Peru Raw material: limestone Feeding size: ≤ 10mm Capacity: 80-100t/h Working hours: 8-10 hours per day Customer feedback: I am very glad to establish a cooperative relationship with LZZG, because we have bought a machine here. This is my second to buy mining machine in LZZG. We found that…
More >
TS1840 in South Africa Raw material: River sand Feeding size: ≤ 5mm Capacity: 130-160t/h Working hours: 8-10 hours per day TS1530 in Vietnam Raw material: Crushed sand Feeding size: ≤ 5mm Capacity: 30-50t/h Working hours: 8-10 hours per day TS1840 in Indonesia Raw material: Concrete sand Feeding size: ≤ 5mm Capacity: 120-150t/h Working hours: 8-10 hours per day
More >