Use vibrating screen with cyclone to improve the sand recovery

LZZG designed vibrating screen with cyclone, to reduce the waste of sand resource in the sand washing process. The vibrating screen is a filter mechanical separation device for the solid phase treatment of mud, consisting of a screen and a vibrator. Widely used in coal and other industries for grading, washing, and dewatering of materials.

The vibrating screen or dewatering screen uses vibration motor excitation as the vibration source so that the material is thrown up on the screen and moves forward in a straight line. The material enters the feeding port of the screening machine evenly from the feeder, and several specifications are produced through the multi-layer screen. The sieve and the sieve are discharged from the respective outlets. Linear vibrating screen (straight screen) has the advantages of stable and reliable, low consumption, low noise, long life, stable vibration shape, and high screening efficiency. It is a new and efficient screening equipment.

 vibrating screen with cyclone produced by LZZG

The Dewatering Screen can be combined with other process equipment, such as Screw Washers, Hydrocyclones. Ordinary sand wheel washer or screw sand washing machine can’t process fine sand below 3mm, we researched vibrating screen with cyclone machine.

The cyclone is a separation and classification device. When the two-phase mixture to be separated is tangentially introduced into the cyclone from a periphery of the cyclone at a certain pressure, a strong three-dimensional elliptical strong rotational shear turbulent motion is generated.

sand cyclone machine

Due to the difference in particle size between the coarse particles and the fine particles, they are subjected to centrifugal force, centripetal buoyancy, fluid drag, etc. Due to centrifugal sedimentation, most of the coarse particles are discharged through the bottom opening of the cyclone, and most of the fine particles are The overflow pipe is discharged to achieve the purpose of separation and classification.

vibrating screen in working

Vibrating screen with cyclone can effectively reduce the loss of fine sand and control it within 5% to 10%. It is widely used for recycling 0.16-3mm fine sand in the wet processing of construction, mining, and industrial sands sectors.

Related Articles

Polyurethane Screen Mesh

Polyurethane dewatering screen mesh size

Polyurethane dewatering screen is widely used in the screening machine of metallurgy, mining, coal, building materials, water conservancy, road construction and other industries. It is a replacement product of steel plate punching mesh, steel wire mesh, stainless steel sieve plate, and rubber sieve plate, with weight. Light, high screening efficiency, no plugging, anti-friction, impact resistance, tear resistance, long life (5-8…

Polyurethane Screen Mesh

High-quality Polyurethane Screen Mesh for Dewatering Screen

Wear Resistant Polyurethane Screen Mesh for sale Polyurethane (PU) is a special material that offers the resilience of rubber combined with the toughness and durableness. It allows people to substitute rubber, plastic, and metal with PU. Polyurethane can reduce factory maintenance and OEM product cost. Polyurethane has better abrasion and tear resistance than rubbers, and offering higher load-bearing capacity. Compared…

Vibrating screen structure diagram

Reasons and solutions for failure of vibrating screen discharge

Vibrating screen is a commonly used material screening equipment, which has the characteristics of small size, light weight, high efficiency and many layers. Part of the operation during use of the equipment is a fine operation, and inevitably some minor problems, such as unloading failure of the vibrating screen and failure of the material, occur in some cases. The vibrating…

Guizhou magnetite tailings dewatering screen

Tailings and concentrate dewatering after wet selection of magnetite

The wet selection of magnetite tailings After the wet selection of magnetite, it is divided into tailings and concentrates. The output of tailings is determined according to the ore grade, concentrate grade and the process used in the beneficiation. When the ore grade is better, the tailings output is lower; the higher the concentrate grade, the lower the tailings output;…

Previous:
Next:

Product Knowledge
Solutions
FAQ
Privacy Policy
Spare Parts
Service