Vibrating dewatering screen for small sand washing plant

small foot print dewatering screen

The small sand washing plant has small footprint, high capacity, high water recycling rate. The equipment is widely used in the washing and selection of materials in industries such as sand and gravel plants, mines, building materials plants, transportation, chemical industry, water conservancy and hydropower, and concrete mixing.

sand dewatering screen

Product info

[Treatment water volume] :  the small sand washing plant has capacity of 30 ton/hour

[Applicable materials]: River pebble, granite, limestone, basalt, coal gangue, weathered sand, river sand, yellow sand and other materials.

[Application range]: This equipment has been widely used in sand quarries, mines, construction sites, highways, road and bridge construction, concrete mixing plants, water conservancy and hydropower, chemical industries and other industries.

[Applicable production line]: Production lines for sand making from river pebble, sand making by granite splitting, limestone crushing and grinding, basalt crushing and sand making, coal gangue crushing and sand making.

small size tailing dewatering screen

Features
1. Using the principle of self-synchronization, the motor drives the vibrator through a tire coupling, with simple structure and low working noise. High working frequency, high vibration intensity, low moisture content of the product on the screen, high unit processing capacity, and high solid recovery rate when used for dewatering tailings.

2. In order to adapt to the difference in the nature of different tailings, the amplitude of this screen is adjustable by adjusting the angle between the main and auxiliary eccentric blocks to meet the dewatering effect of tailings of different properties. The screen surface of the pre-dewatering sieve is installed at 45 degrees from the horizontal, and the dewatering sieve is installed at a negative angle to increase the dewatering area and promote the dehydration of the material as soon as possible to form a filter layer.

3. In order to facilitate maintenance and replacement of the screen surface, the screen surface adopts rail seat installation. The use of polyurethane elastic screen surface, high open rate and elasticity, is conducive to dehydration. The side pressure plate of the screen surface is made of polyurethane material, which has a long life, and the screen surface is fixed and reliable, and can effectively protect the side plate of the screen frame from being washed by materials.

4. The side plate and the beam are connected by torsion shear type high-strength bolts, and there is no welding seam, which avoids the problem of side plate cracking caused by welding stress.

6. The vibrator is an eccentric unit structure, which is easy to disassemble and maintain. The bearing adopts special bearings for vibration equipment to avoid premature damage due to heating.

7. The main welding structural parts are all surface treated, and the surface of the lower beam is beautifully coated with anti-wear coating to prevent the beam from premature wear and break. The steel coil spring is used to reduce vibration, which can greatly reduce the dynamic load of the screen machine on the foundation.

8. The finite element structure analysis software is adopted to ensure that the strength, rigidity and force of the screen frame are reasonable, light weight, and low energy consumption.

9. Users can be equipped with a structure with a bottom frame and a feeding box according to their needs, which is convenient for installation and debugging.

linear dewatering screen for sand washing

Technical parameters

Model Feed Size (mm) Capacity (t/h) Screen Panel (mm) Screen Area (m²) Power (kw) Weight (kg) Overall Size (mm)
TS0918 ≤10 10-20 900*1800 1.62 0.75*2 590 1890*1290*1080
TS0924 ≤10 10-20 900*2400 2.16 1.1*2 750 2480*1290*1220
TS1224 ≤10 20-40 1200*2400 2.88 2.2*2 1080 2480*1590*1430
TS1230 ≤10 20-40 1200*3000 3.6 2.2*2 1230 3080*1590*1500
TS1236 ≤10 20-40 1200*3600 4.32 3.0*2 1490 3680*1590*1500
TS1530 ≤10 30-60 1500*3000 4.5 3.0*2 1360 3080*1890*1440
TS1536 ≤10 30-60 1500*3600 5.4 3.0*2 2180 3680*1890*1450
TS1836 ≤10 60-80 1800*3600 6.48 5.5*2 3350 3720*2420*1930
TS1842 ≤10 60-80 1800*4200 7.56 5.5*2 3720 4370*2420*2100

Installation and adjustment

⒈The motor should be fastened on the installation surface, and the installation surface must be smooth and flat.

⒉The motor can be installed horizontally.

⒊The motor lead adopts four-core rubber cable YZ-500V. The lead-out cable is not allowed to fold sharply when connected to the power supply, and it is reliably fixed with the vibrating body.

⒋The motor should have reliable grounding, there is a grounding device in the motor, the lead end has a mark, and it can also be grounded with a firm foot bolt.

⒌Adjustment of excitation force.

CONTACT US

<<Previous:


RECOMMEND EQUIPMENT RELATED PROJECT
INFO REQUEST