Indonesia laterite nickel ore deep cone concentrator
The ore preparation process of hydrosmelting is mainly ore washing and chromium removal. The raw ore is mainly low-grade limonite or mixed ore mixed with residual ore, which has the…
published date: 06-09-2018
As users of spiral sand washer, we believe that all of you hope your purchasing equipment can have a longer service life, then users should pay more attention to some details in the process of operation to avoid the failure of the machine.
Now, sand washer manufacturer wll share the information of the key factors for affecting service life of spiral sand washer.
When the screw sand washing machine works, because the spiral blade drives a large amount of airflow rotation, the broken material in the crushing cavity after multi-stage crushing and grinding, for the material fineness is small, so in the process of operation, these powders fly easily. In addition, the screw sand washing machine is broken after washing, it will increase the amount of dust, which will wear the backplan in a long time, importantly, falling on the back panel, which will lead to the sealing of the spiral sand washer, greatly reducing the dust pollution.
There is no doubt that a long-term massive dust do harm to equipment, it is easy to corrode the spiral sand washing machine equipment, accelerate the impact wear on the key parts of the equipment, and even accelerate the aging of the spiral sand washing machine equipment, which seriously affects the service life of the equipment and makes the equipment prone to failure!
So, how to solve this problem? In fact, We can install spray mist device on spiral sand washer, which greatly reduce the production of operation. What’s more, for electrical components that are not allowed to spray water, we can take measures such as canvas and belt sealing and capping can be used to keep the dust in the body and prevent leakage. It can effectively reduce dust damage and extend the service life of the screw sand washer through this way.
We have introduced the key factors for affecting service life of spiral sand washer, hoping everyone can pay more attention to it!
The ore preparation process of hydrosmelting is mainly ore washing and chromium removal. The raw ore is mainly low-grade limonite or mixed ore mixed with residual ore, which has the…
This method uses high-purity quartz sand as raw material to produce solar-grade polysilicon. Select silica materials with a SiO2 content of more than 99%, and perform water quenching, crushing, screening,…
The sewage produced by washing fluorite contains only about 5% mud, but it is difficult to settle. Please tell me why. After fluorite is mined, because a lot of crushed…
Trough-shaped hydraulic classifiers include hydraulic classification boxes and KP-4C hydraulic classifiers. It is mainly used for grading operations before gravity selection of the ore dressing shaker to meet the requirements…