Mud desander for Solids Control system

Mud Desander is widely used in the purification and recycling of mud for the construction hydro power, continuous concrete wall, slurry shield tunnel, etc. The drilling mud cleaning equipment is increasingly becoming a necessity of civilized construction since it not only can cut down construction cost, but also can reduce the pollution of the environment.

Mud Desander used in tunnel shield mud water cleaning device

How the mud cleaning system work

1. The circulation of the drilling fluid is maintained by a circulating mud pump. The high-pressure drilling fluid discharged from the mud pump passes through the ground high-pressure manifold, riser, hose, faucet, kelly, drill pipe, drill collar to the drill bit, and sprays from the drill nozzle. Out to clean the bottom of the well and carry cuttings.

LZZG solid control system/mud cleaner

2. The annular space formed along the drill string and the well wall (or casing) flows upwards, and after reaching the ground, flows into the mud pool through the discharge pipeline, and then returns to the upper pool through various solid control equipment, and finally enters the mud pump cycle. Use again. The various pipe fittings and equipment through which the drilling fluid flows constitute a complete drilling fluid circulation system.

Use hydro-cyclone remove sand from mud water

Mud Desander is mainly composed of a hydro cyclone desilter. Under the pressure of muddy water, it enters the cyclone separation system through the pipeline at high speed and makes a swirling motion in the cylindrical wall shell of the cyclone. The coarse particles are thrown to the wall and gradually move downward under the action of gravity. The bottom is discharged. The fine particles move to the wall at a lower speed and are discharged by the central flowing liquid from the upper central overflow pipe to make the mud coarsely subdivided.

Get the catlog and brochure, the latest price.

Related Articles

LZZG sludge thickener in mud cleaning system

Dewatering belt filter presses common faults handling

During the operation of the belt filter press, the filter belt often deflects and folds, and the crease of the filter belt and the sludge scraper are constantly worn out and ruptured, which greatly reduces the life of the filter belt and brings large economic losses to the enterprise. There are several reasons for the deviation of the filter belt:…

silica sand processing equipment - Attrition Scrubber-CX0.25

Silica sand processing plant equipment for glass manufacturer

The silica sand scrubber solves the problem that there is currently no special equipment for scrubbing quartz sand. The function of the equipment is to scrub the dust and oxidized impurities adhered to the surface of the silica sand; improve the purity of the silica sand material, and the scrubbing efficiency can reach more than 90%. Use of silica sand…

rotary drum screen

Rotary sand gravel sieving machine better screening effect

The rotary sand gravel sieving machine is made up of five parts: hexagonal drum, frame, funnel, reducer and motor. After the broken stone enters the drum, on the one hand, it is screened as the drum rotates. On the other hand, the stone with a large particle size flows forward along the slope of the drum and is gradually screened…

Coal slime recycling dewatering screen manufacturers

The dewatering screen is mainly used for dewatering, desliming, and dissolving. It can be used for sand washing in sand and gravel plants, coal slime recovery in coal preparation plants, dry discharge of tailings in mineral processing plants, etc., so it is also called sand dewatering screen, dewatering screen Slime dewatering screen, tailings dry discharge screen, high frequency dewatering screen,…


Product Knowledge
Privacy Policy
Spare Parts